How to make a Layered Easter Card

Easter is just around the corner, so I thought I would share, How to make a Layered Easter Card. Since I’m on the Fantabulous Circut Challenge Blog I’ve even thrown in a Cricut Cut too.

How to make a Layered Easter Card

Challenge #298-Easter

Make a project about Easter.

This Weeks Sponsor

And the prize is-

When I first got my Cricut I wasn’t sure how to use the device. I would have lots of trial and error trying to figure out how to cut using those dials and the keypad on the machine. Now that I have a newer machine the Cricut Explore Air I love using it almost daily.

Items used in How to make a Layered Easter Card
Calico Collage Victorian Easter Digital Download – FREE
Cricut Explore Air Premium Bundle
Gypsy Font Cartridge – Egg Flourish
Brutus Monroe Easter Blessings (this is a stamp club set)
Brutus Monroe Detail Ink – Raven, Aubergine
Circle punch, 1 inch, 1.25 inch, 1.50 inch (here is a Nesting Circle set for many sizes I found on Amazon)
Ranger Blending tool
CUTTLEBUG 5X7 EMBOSS-OXFORD Embossing Folder
Darice Embossing Folder, 4.25 by 5.75-Inch, Brick Wall
3D Pop Dots Square Dual-Adhesive Foam Mount
PURPLE 1mm Bugtail Satin Cord Shamballa Macrame Beading Nylon Kumihimo String (210ft Spool)
Stamp Block Set
Stick On Pearls
A2 Greeting card
White cardstock cut just shy of 4.25 in. x 5.50 in., Mat for Rabbit image
Aleene’s Tacky Glue
Tattered Angels Glimmer Mist – Pearl

Now that I have Cricut Design Space it allows me the ability to customize images to my needs. For today’s project, I pulled the Egg Flourish from the Gypsy Font cartridge into Design Space.

Once I had the image in Design space I then spent a few minutes removing the Egg as I didn’t want that part of the cut I wanted the mat. I then sized the cut to fit on a A2 greeting card and cut on two different shades of purple cardstock.

Using my  Vagabond I made a sandwich with the Darice Embossing Folder, 4.25 by 5.75-Inch, Brick Wall and the light purple cardstock. I also made a sandwich with the CUTTLEBUG 5X7 EMBOSS-OXFORD Embossing Folder and white cardstock.

On both of the newly textured papers I used the Ranger blending tool and Brutus Monroe Aubergine ink to bring out the texture.

Tattered Angels Glimmer Mist – Pearl was sprayed over both of the textured pieces. Set aside to dry. (Tip store your Glimmer Mist on it’s side and then it is easier to shake the glimmer into the liquid)

Print the Calico Collage Victorian Easter Digital Download – FREE and cut out the large rabbit image, mat with white cardstock. Next layer on the purple mat.

Stamp the Brutus Monroe Easter Blessings on a scrap of white cardstock and punch with one inch punch. Punch a 1.25 of purple to mat.

Select the round bunny image from the Calico Collage Victorian Easter Digital Download – FREE, punch a purple mat using the 1.5 punch.

Use Aleene’s Tacky Glue to adhere the purple mat with the large bunny image to the White basket weave card topper.

Wrap PURPLE 1mm Bugtail Satin Cord Shamballa Macrame Beading Nylon Kumihimo String (210ft Spool) around the lower portion of the card. Adhere to A2 card.

Adhere Circle Bunny and Easter Blessings using Pop Dots. Add a bow and place the Stick On Pearls around the edge of the purple mat.

How to make a Layered Easter Card

Enjoy the card!

Here is a video showing How to make a Layered Easter Card

Come along and join in the fun on the Fantabulous Circut Challenge Blog since now you know How to make a Layered Easter Card. You could win the prize! Just enter a project that the theme is Easter and uses at least one Cricut cut image. That’s it! Super simple!

Thanks for stopping by the blog today.

Be sure to follow me on my Facebook Page to see updates about projects, where I am teaching and more.

How to make a Layered Easter Card

How to make a Hello Spellbinders Pinwheels Greeting Card

How to make a Hello Spellbinders Pinwheels Greeting Card. Using two sided Rinea Foil, Darice Bamboo Embossing folder and EK tools Hello Punch. I’ll show you how to make a beautiful Pinwheel card.

How to make a Hello Spellbinders Pinwheels Greeting Card

While shopping at Tuesday Morning a few weeks back  I picked up the Spellbinders Pinwheels dies. Thinking these would be beautiful made with the Rinea Foil.

So I pulled out all of my supplies and set to making this card.

Supplies for How to make a Hello Spellbinders Pinwheels Greeting Card
Two sided Blue and Gold smooth Rinea Foil
Spellbinders S5-125 Shapeabilities Pinwheels Die Templates
EK tools Hello Punch
Round Mini Gold Brads
White card A2
Scrap of white cardstock
Vagabond Machine Inspired by Tim Holtz or other like die cutting machine
Tattered Angels 17123 Glimmer Mist Art Paint, Leap Frog
Glue Dots Brand Adhesive Products Craft Roll
Awl
Heat Tool
Brutus Monroe Surface ink Jurassic
White A2 Card
Aleene’s Tacky Glue
Zig Two Way Glue
Scissors

Below you will find a video on How to make a Hello Spellbinders Pinwheels Greeting Card.

Making the pinwheels is really easier than it looks. Once I figured out how many pieces to cut and how to put these together.

For the two pinwheels, I made there are five cuts of each of the two dies. The pinwheel looks best when two sided paper is used. The Rinea Foil was perfect since there are several papers that have different colors on each side.

How to make a Hello Spellbinders Pinwheels Greeting Card

Be aware that this card will get smashed if you put it in an envelope and mail it to someone. I would suggest either hand delivering the card or putting it in a small box so that it arrives in its full beautiful glory.

Make sure you head over to the Rinea website and see all the beautiful colors of paper foils that they offer. This isn’t your typical foil paper, it is better.

I hope that today’s post inspires you to make a pinwheel with the Rinea foil. Feel like a kid again and make one for yourself.

How to make a Hello Spellbinders Pinwheels Greeting Card

Looking for a gift check out my store. There are lots of things in there and more added all of the time.

Thanks for stopping by the blog today.