How to make a Layered Easter Card

Easter is just around the corner, so I thought I would share, How to make a Layered Easter Card. Since I’m on the Fantabulous Circut Challenge Blog I’ve even thrown in a Cricut Cut too.

How to make a Layered Easter Card

Challenge #298-Easter

Make a project about Easter.

This Weeks Sponsor

And the prize is-

When I first got my Cricut I wasn’t sure how to use the device. I would have lots of trial and error trying to figure out how to cut using those dials and the keypad on the machine. Now that I have a newer machine the Cricut Explore Air I love using it almost daily.

Items used in How to make a Layered Easter Card
Calico Collage Victorian Easter Digital Download – FREE
Cricut Explore Air Premium Bundle
Gypsy Font Cartridge – Egg Flourish
Brutus Monroe Easter Blessings (this is a stamp club set)
Brutus Monroe Detail Ink – Raven, Aubergine
Circle punch, 1 inch, 1.25 inch, 1.50 inch (here is a Nesting Circle set for many sizes I found on Amazon)
Ranger Blending tool
CUTTLEBUG 5X7 EMBOSS-OXFORD Embossing Folder
Darice Embossing Folder, 4.25 by 5.75-Inch, Brick Wall
3D Pop Dots Square Dual-Adhesive Foam Mount
PURPLE 1mm Bugtail Satin Cord Shamballa Macrame Beading Nylon Kumihimo String (210ft Spool)
Stamp Block Set
Stick On Pearls
A2 Greeting card
White cardstock cut just shy of 4.25 in. x 5.50 in., Mat for Rabbit image
Aleene’s Tacky Glue
Tattered Angels Glimmer Mist – Pearl

Now that I have Cricut Design Space it allows me the ability to customize images to my needs. For today’s project, I pulled the Egg Flourish from the Gypsy Font cartridge into Design Space.

Once I had the image in Design space I then spent a few minutes removing the Egg as I didn’t want that part of the cut I wanted the mat. I then sized the cut to fit on a A2 greeting card and cut on two different shades of purple cardstock.

Using my  Vagabond I made a sandwich with the Darice Embossing Folder, 4.25 by 5.75-Inch, Brick Wall and the light purple cardstock. I also made a sandwich with the CUTTLEBUG 5X7 EMBOSS-OXFORD Embossing Folder and white cardstock.

On both of the newly textured papers I used the Ranger blending tool and Brutus Monroe Aubergine ink to bring out the texture.

Tattered Angels Glimmer Mist – Pearl was sprayed over both of the textured pieces. Set aside to dry. (Tip store your Glimmer Mist on it’s side and then it is easier to shake the glimmer into the liquid)

Print the Calico Collage Victorian Easter Digital Download – FREE and cut out the large rabbit image, mat with white cardstock. Next layer on the purple mat.

Stamp the Brutus Monroe Easter Blessings on a scrap of white cardstock and punch with one inch punch. Punch a 1.25 of purple to mat.

Select the round bunny image from the Calico Collage Victorian Easter Digital Download – FREE, punch a purple mat using the 1.5 punch.

Use Aleene’s Tacky Glue to adhere the purple mat with the large bunny image to the White basket weave card topper.

Wrap PURPLE 1mm Bugtail Satin Cord Shamballa Macrame Beading Nylon Kumihimo String (210ft Spool) around the lower portion of the card. Adhere to A2 card.

Adhere Circle Bunny and Easter Blessings using Pop Dots. Add a bow and place the Stick On Pearls around the edge of the purple mat.

How to make a Layered Easter Card

Enjoy the card!

Here is a video showing How to make a Layered Easter Card

Come along and join in the fun on the Fantabulous Circut Challenge Blog since now you know How to make a Layered Easter Card. You could win the prize! Just enter a project that the theme is Easter and uses at least one Cricut cut image. That’s it! Super simple!

Thanks for stopping by the blog today.

Be sure to follow me on my Facebook Page to see updates about projects, where I am teaching and more.

How to make a Layered Easter Card

How to make a Ducky Baby Card

Today I’m sharing, How to make a Ducky Baby Card. Using Cricut Cut files Ducks and Ship from the Wall Decor and More Cartridge, Brutus Monroe stamp and ink and more.

How to make a Ducky Baby Card

This is for the Fantabulous Cricut Blog Challenge Happy Monday challenge!

Challenge #297-Anything Goes

Make a project using anything in the Cricut Library!

This Weeks Sponsor

Dreaming Tree SVG’s

The winner will receive a $20 Gift Certificate!

To qualify for the prize, be sure to use at least 1 Cricut cut on your project and if it’s not obvious, let us know what cartridge you used. If you use a Cricut Explore machine, at least one cut must be from the Cricut catalog of images.

If it isn’t a card, you will get two entries into the drawing!

Since the theme, this time is anything goes and I just happened to find some really cute yellow ducky scrapbook paper in my stash I knew this was the perfect time to use it today.

Supplies for How to make a Ducky Baby Card
Cricut: Ducks and ship Waves from Wall Decor and More
Brutus Monroe Detail Ink – Raven
MISTI
Brutus Monroe – Bunny Kisses
Yellow Duck scrapbook paper
Tim Holtz Distressed Inks, Tumbled Glass, Mustard Seed
Gemstones
Dot Embossing folder
Bubbles Embossing Folder
Pop Dots
Embroidery floss, two colors yellow and golden yellow
Doily
Aleene’s Tacky Glue
Tattered Angels Glimmer Mist Sunflower
Zig two-way glue

The ducks and the waves were cut on my Cricut. Today I wanted to make Baby greeting cards so I cut the ducks and waves to fit on a Standard A2 greeting card.

For the ducks and waves, I used Tim Holtz Distressed Inks, Tumbled Glass, Mustard Seed to highlight the texture.

How to make a Ducky Baby Card

Tattered Angels Glimmer Mist Sunflower was sprayed on a white doily. This adds color and a pretty sparkle.

Digging around in my stash I found some embroidery floss and knew that this would make a perfect accent to the card.

Using my MISTI I placed the Congrats on your new little one from the Brutus Monroe – Bunny Kisses set inside and inked with Brutus Monroe Detail Ink – Raven. Next I cut the ends to look like a pennate and placed Pop dots on the back.

Here is a video on How to make a Ducky Baby Card

This baby card turned out super cute. And I was able to use items in my stash. My stash will slowly start to get smaller and I’ll have wonderful cards to share.

Interested in purchasing the finished cards I make? I offer many of my cards in my store. The cards a usually blank inside and come with a matching envelope. The cards I make are A2 size or 4.25 in. x 5.5 in. in size. If you are wanting a greeting on the inside feel free to email me to discuss details or to connect with me via my Facebook page.

Thanks for stopping by today to learn How to make a Ducky Baby Card. My hope is that this will inspire you to create art today.

“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”

Cricut Beautiful Shaker Card

Today I’m sharing a Cricut Beautiful Shaker Card for the Fantabulous Cricut Challenge Blog Challenge # 295 Sequins or other Embellishments. Sponsored by SpieglMom. Projects are to have at least one Cricut cut and Sequins or other embellishments.

For my project, I decided to make a shaker card using the Yellow Frame from the Stand & Salute Cartridge.

Cricut Beautiful Shaker Card

Cut pink texture card stock at 3.25 in wide. Use the cut image to then cut a window out of a piece of fun foam. Cut a piece of white cardstock the same size as the top, this will be the back.

I find that cutting a back the same size as the front makes putting a shaker card together much easier.

White card stock cut at 4 in x 5.25 was used for the background. The Tim Holtz stencil and Texture paste was used. Tattered Angels Glimmer Mist colors: Party Pin and Cranberry Zing colored the background. Rouge Chalk in from Brutus Monroe was used around the edges of the A2 Greeting card.

On the back piece of the shaker card stamp the Botanical Background stamp from Brutus Monroe with Embossing Ink. Then spray with Tattered Angels Glimmer Mists: Party Pink and Turquoise Blue.

Stamp the Botanical Background stamp on the pink shaker card front with Rouge Chalk ink from Brutus Monroe.

Cricut Beautiful Shaker Card

On a scrap of white card stock stamp the word Beautiful from the Beautiful stamp set from Brutus Monroe with Embossing ink, emboss with black powder. Use distress blending tool to add Rouge chalk ink to the edge after trimming down and rounding the corners of this piece.

Assemble the shaker card by attaching the fun foam to the Botanical background. Fill shaker card with sequins, butterfly sequins, and hole-less beads. Place shaker card top with acetate over fun foam.

Add 3D dots to the back of Beautiful sentiment and attach to lower right corner of the card.

What are your thoughts on this Cricut Beautiful Shaker Card? I love how a shaker card makes me feel. It is like a grown up toy. Have fun making one yourself.

Make sure you check out the other projects over at the Fantabulous Cricut Challenge Blog and enter to win the prize offered this week.

Here is a video of how to make this card.

To purchase this card click here.

Thanks for stopping by the blog today.

Shared this project on the following challenges:

Alphabet Challenge Blog: Y for You Choose
CARDZ TV Anything goes Designers Challenge #3
Naughty or Nice Challenges

Sweetheart Valentine Card

It’s a Sweetheart Valentine Card project on the blog today. The Fatabulous Circut Challenge Blog (aka FCCB) has a bi weekly challenge. This weeks challenge theme is #294 Valentines Day.

DL.Art is the sponsor for this weeks challenge. To qualify for the prize, be sure to use at least 1 Cricut cut on your project and if it’s not obvious, let us know what cartridge you used. If you use a Cricut Explore machine, at least one cut must be from the Cricut catalog of images.

If it isn’t a card, you will get two entries into the drawing!

For this project I decided to use the Sweetheart cut file from the Sweethearts Cricut Cartridge file M46C0D. This was cut on red card stock to fit on a standard A2 card. This was perfect for my Sweetheart Valentine Card project.

Sweetheart Valentine Card

 

The couple featured on the card is from Calico Collage. Romantic Lovers is a digital download found on Calico Collage’s Etsy site. I’m a new member of her Design Team and loving the ability to work with her designs.

Sweetheart Valentine Card

Also used in this card: Canvas Corp Red & White Diamond card stock. This paper is so yummy. I thought it was perfect as the background for this card, don’t you just love it too?

Of course I have to use inks on cards some where, and this card is no different. Brutus Monroe’s Detail Ink – Raven was used to give more definition to the edges of the layers. Used Tim Holtz Vintage Photo Distressed ink to add a little more distressed look to the photo as well.

The corrugated paper under the Sweethearts word was something in my stash. Not sure where it came from, but it has great texture. Reminds me of the days when Oreos had that great black texture in the bottom of the package. Oreos, yum..

Recently I went on an Ebay shopping spree and purchased a few dies from China. These little dies were very inexpensive and I think I’m addicted to them now.

Sweetheart Valentine Card

The little self adhesive pearls are from Paper Studios. What I like to do is pick these up when there is a sale at Hobby Lobby, then I know I’ll have a supply of these on hand.

A process video was made, have a look.

I’m enjoying being on the FCCB Design Team. Being on the team is helping me to use my Cricut more often and learn more. Check out the FCCB site and join in the challenge.

Sweetheart Valentine Card

Hope you enjoyed this Sweetheart Valentine Card project today.

Thanks for stopping by the blog today. Make sure to check out the links to the products and to the FCCB for the current challenge and enter you could win.

Interested in purchasing the finished cards I make? I offer many of my cards in my store. The cards a usually blank inside and come with a matching envelope. The cards I make are A2 size or 4.25 in. x 5.5 in. in size. If you are wanting a greeting on the inside feel free to email me to discuss details or to connect with me via my Facebook page.

Cricut Globe – Let it Snow

Today I’m sharing my Cricut Globe – Let it Snow project for the Fantabulous Cricut Challenge Blog Challenge #293 – Snow Sponsored by Pretty Cute Stamps. Challenge this week is to have a snow theme and use at least one Cricut cut in the project.

Cricut Globe - Let it Snow

What a great time to use a snow globe than this? The globe is from the Joys of the Season Cricut Cartridge. It was cut at 4.5 in. tall. The top most layer was removed as I wanted to stamp on the top layer and not have holes cut through the image.

Used Brutus Monroe snowflake stamps from the Oh Deer set. Stamped in Tim Holtz Distressed Ink Tumbled Glass and Brutus Monroe Ink Cornflower.

Brutus Monroe Stamp Set Oh Deer was used. This little fat deer makes me laugh every time I see him. Stamped with Brutus Monroe Detail Ink – Raven on a scrap of white card stock and then fussy cut. Water colored with Tattered Angels Glimmer Mist – Cork, Tattered Leather and It’s Black. Also used White High Impact paint by Tattered Angels.

Cricut Globe - Let it Snow

VersaMark Stamp pad was mashed onto Deer image and snow globe then Ranger Clear Holographic embossing powder was applied and heat set. This gives the appearance of being inside a snow globe.

Let it Snow from Printworks Stamps was stamped in Brutus Monroe Embossing ink, embossed with black embossing powder.

Tim Holtz Distressed Ink Brushed Corduroy applied to base of the snow globe.

Cut white card stock at 4 in. x 5.25 emboss with Cuttlebug Snowflake embossing folder. Use Tim Holtz Disressed Ink Tumbled Glass and blending tool to add color around the edge. Mash VersaMark stamp pad to embossed image, cover with Ranger Clear Holographic embossing powder, heat set.

Blue card stock cut at 4.23 in. x 5.47 in. adhered as the first layer on a standard A2 greeting card. Layer Snowflake background. Assemble snow globe and adhere on top of embossed layer. Use pop dots to adhere Deer on top.

Video on how to make this card.


Super Fun greeting card! Love sharing this Cricut Globe – Let it Snow. Hope you enjoyed seeing how it was made. If you would like to purchase the finished card for $10.00 including shipping click here.

Cricut Globe - Let it Snow