St Patrick’s Loaded Envelope & How To make a Kiss Me Pin

Seeing really cool Loaded envelopes on the web recently I decided I should make one. So Here is my St Patricks Loaded Envelope & How To make a Kiss Me Pin.

St Patrick's Loaded Envelope & How To make a Kiss Me Pin

Here are some of the supplies used in the St Patrick’s Loaded Envelope & How To make a Kiss Me Pin:
Rinea Foil – Gold
Brutus Monroe Jurassic Ink
Large Shamrock Cut on Silhouette Cameo 3
Cricut Explore Air – on Amazon
Cricut Cuts: Circle – Basic Shapes, Flower – Home Decor, Bottom of ribbon from 1st Place Ribbon – Locker Talk. Shamrock was an image I drew the Shamrock and used the Cricut software to convert it to a cut file.
Green card stock – On Amazon
Dymo Label maker with Black Label
Xyron – on Amazon
Ranger Blending Tool – on Amazon
Punch Bunch Flower Punch
McGill Stylus – on Amazon
Fun Foam – on Amazon
Aleene’s Tacky White Glue
Mini Clothes Pins: 7gypsies
Green Seam Binding – on Amazon

Cut the Shamrock Envelope with the Silhouette. For this project, I cut one with the hearts cut out in the front and cut a second Shamrock for the back. Use the Brutus Monroe Jurassic Ink and a Tim Holtz Blending tool to add color around the edges.

Glue the bottom half of the Shamrock but not up into the center just around the lower half with white glue. Don’t use tape, if you do your items will stick to the tape.

Tie a bow with green seam binding. Glue in the center of the shamrock to represent a stem.

Add St Patrick’s Day Altered Paperclips to either side of the St Patrick’s Loaded Envelope.

Pin St Patrick’s Day Lady ATC to the front of the St Patrick’s Loaded Envelope.

Fill the inside of the Shamrock Envelope with Calico Collage St Patrick’s images. Some of the images were mounted on Silhouette Lace Tags and scraps of paper.

Extra Shamrocks were placed inside a green envelope.

St Patrick's Loaded Envelope & How To make a Kiss Me Pin

How to make a Kiss Me Pin:

Cut the Flower Shape and the lower part of the 1st place ribbon out of the same shade of green card stock. Use the Brutus Monroe Jurassic Ink and a Tim Holtz Blending tool to add color around the edges.

Load a lighter shade of green card stock cut the circle and the shamrock. Use the Brutus Monroe Jurassic Ink and a Tim Holtz Blending tool to add color around the edges.

Layer the items together to form a ribbon, using Aleene’s Tacky White Glue and Xyron.

St Patrick's Loaded Envelope & How To make a Kiss Me Pin

Load the Dymo Label maker with Black Label and type the words: “Kiss Me”. Apply on the lower right of the shamrock flower area.

Cut a scrap piece of paper, place pin back on paper and glue with Aleene’s Tacky White Glue, add more glue and adhere to back of the ribbon.

To form the flower, from the Gold Rinea Foil punch with the Punch Bunch Flower Punch. Place the flower on the fun foam and use the McGill Stylus to shape into a cup.

Glue flower in the center of Shamrock.

Add Kiss Me Pin to the St Patrick’s Day Loaded Envelope with a Mini Clothes Pin from 7gypsies.

St Patrick's Loaded Envelope & How To make a Kiss Me Pin

Have fun adding other items to fill the St Patricks Loaded Envelope. I even added stickers, some seam binding and extra pieces of paper.

Here is a video of the St Patrick’s Loaded Envelope & How To make a Kiss Me Pin.

 

Hope you enjoyed this post on the St Patricks Loaded Envelope & How To make a Kiss Me Pin.  Who would you give one to?

Thanks for stopping by the blog today.

St Patrick's Loaded Envelope & How To make a Kiss Me Pin

How to Make a St Patrick’s Day Altered Paperclip

It is so much fun to alter paperclips. Here is another tutorial: How to Make a St Patrick’s Day Altered Paperclip. Using Rinea Foil and a Shamrock cut on my Cricut.

How to make a St Patrick's Day Altered Paperclip

Wanting to make some fun St Patrick’s altered paper clips I turned to my Cricut first. There wasn’t a Shamrock in my Cricut files so I decided to draw the image and then scanned it into my computer.

Using the Cricut Software I then turned the image into a cut file and cut the Shamrock out of green card stock. Of course, I had to cut at least 20 because these turned out so cute!

Rinea Foil – Gold
Brutus Monroe Jurassic Ink
Ribbon
Jumbo Paperclip
Astrobrights Color Paper, 8.5” x 11”, 24 lb / 89 gsm, Gamma Green, 500 Sheets
Cricut Explore Air 2 Cutting Machine.
Paper Studios Star Embossing Folder
Tim Holtz Vagabond
Xyron Sticker Maker
Ranger Ink Blending Tool
Punch Bunch Flower Punch
McGill Stylis
Fun Foam
Aleene’s Tacky White Glue

Cut a strip of Rinea Foil – Gold at 1.5 in. x 3 in. Emboss in Paper Studios Star Embossing folder with Tim Hotz Vagabond or other like machine. Fold in half and slide through the closed side of the paper clip. Glue with Aleene’s Tacky White Glue.

Place the shamrock in the Xyron Sticker maker then place on both sides of Rinea Foil.

Tie a bow with the Green ribbon and place on the corner of Shamrock.

Use the Punch Bunch flower punch on the Rinea Foil – Gold and punch two flowers. Place on fun foam and press with McGill Stylis to form into a flower. Adhere flower in the center of the shamrock. Repeat on the other side.

St Patrick's Day Altered Paperclip

Simple as that you have made a St Patrick’s Day Altered Paperclip.

Here is a video on How to Make a St Patrick’s Day Altered Paperclip.

 

Now that you know how to make a St Patrick’s Day Altered Paperclip, how many will you make?

St Patrick's Day Altered Paperclip

Thanks for stopping by the blog today.

How to make a St Patricks Day Lady ATC

Since St. Patricks is just around the corner I wanted to share a project. How to make a St Patricks Day Lady ATC. Using the Calico Collage St Patrick’s Digital Images. And some Rinea Foil.

How to make a St Patricks Day Lady ATC

Here is a list of items used for the St Patricks Day Lady ATC:
Calico Collage St Patrick’s Digital Images
Rinea Foil – Gold
Brutus Monroe Jurassic Ink
Shamrock Cut on Silhouette
Xyron
Blending Tool
Dymo Label Maker with black label
Green Card Stock cut to 2.5 in. x 3.5 in.
Punch Bunch Flower Punch
McGill Stylus
Fun Foam
Aleene’s Tacky White Glue

How to make a St Patricks Day Lady ATC

Very simple to make this St Patricks Day Lady ATC.

Select a lady from the Calico Collage St Patrick’s Digital Images and cut to size. Use the Brutus Monroe Jurassic Ink and a Blending tool to add color around the edges. This also hides the cut white paper edge.

Use the Brutus Monroe Jurassic Ink and blending tool on the edge of the Green Card Stock cut to 2.5 in. x 3.5 in.

Layer the St Patrick’s Day Lady on the green card stock with Aleene’s Tacky White Glue.

Blend the edges of the Shamrock with Brutus Monroe Jurassic Ink. Place in Xyron Sticker maker then adhere to lady.

Use the Punch Bunch flower punch on the Rinea Foil – Gold. Next place the flower on the Fun Foam and use the McGill Stylus to cup into a flower.

Add a small dot of glue in the center of the Shamrock then place the flower.

Type out the words “Kiss Me” on the Dymo Label Maker with black label. Adhere to the ATC.

How to make a St Patricks Day Lady ATC

Here is a video on How to make a St Patricks Day Lady ATC:

These ladies are sure to make someone green with envy. Pick up the set today and make your own St Patrick’s Day Lady ATC.

How to make a St Patricks Day Lady ATC

Thanks for stopping by the blog today.