How to make a Hello Spellbinders Pinwheels Greeting Card

How to make a Hello Spellbinders Pinwheels Greeting Card. Using two sided Rinea Foil, Darice Bamboo Embossing folder and EK tools Hello Punch. I’ll show you how to make a beautiful Pinwheel card.

How to make a Hello Spellbinders Pinwheels Greeting Card

While shopping at Tuesday Morning a few weeks back  I picked up the Spellbinders Pinwheels dies. Thinking these would be beautiful made with the Rinea Foil.

So I pulled out all of my supplies and set to making this card.

Supplies for How to make a Hello Spellbinders Pinwheels Greeting Card
Two sided Blue and Gold smooth Rinea Foil
Spellbinders S5-125 Shapeabilities Pinwheels Die Templates
EK tools Hello Punch
Round Mini Gold Brads
White card A2
Scrap of white cardstock
Vagabond Machine Inspired by Tim Holtz or other like die cutting machine
Tattered Angels 17123 Glimmer Mist Art Paint, Leap Frog
Glue Dots Brand Adhesive Products Craft Roll
Awl
Heat Tool
Brutus Monroe Surface ink Jurassic
White A2 Card
Aleene’s Tacky Glue
Zig Two Way Glue
Scissors

Below you will find a video on How to make a Hello Spellbinders Pinwheels Greeting Card.

Making the pinwheels is really easier than it looks. Once I figured out how many pieces to cut and how to put these together.

For the two pinwheels, I made there are five cuts of each of the two dies. The pinwheel looks best when two sided paper is used. The Rinea Foil was perfect since there are several papers that have different colors on each side.

How to make a Hello Spellbinders Pinwheels Greeting Card

Be aware that this card will get smashed if you put it in an envelope and mail it to someone. I would suggest either hand delivering the card or putting it in a small box so that it arrives in its full beautiful glory.

Make sure you head over to the Rinea website and see all the beautiful colors of paper foils that they offer. This isn’t your typical foil paper, it is better.

I hope that today’s post inspires you to make a pinwheel with the Rinea foil. Feel like a kid again and make one for yourself.

How to make a Hello Spellbinders Pinwheels Greeting Card

Looking for a gift check out my store. There are lots of things in there and more added all of the time.

Thanks for stopping by the blog today.

How to Cut, Fold and Tuck with Spellbinders Whirl About die

You may have seen these dies and had no clue what to do. Today I’ll share How to Cut, Fold and Tuck with Spellbinders Whirl About die. These dies make beautiful projects. Paired with The Rinea Foil, Brutus Monroe stamp and inks today I’ll show you how to create this card.

How to Cut, Fold and Tuck with Spellbinders Whirl About die

When I saw this die at Tuesday Morning I just knew it would make a beautiful card using the Rinea Foil. I love that when using the two sided foil in two different colors how both colors can be seen.

How to Cut, Fold and Tuck with Spellbinders Whirl About die

Cut gold/purple Rinea Foil to just under 4.25 in. x 5.5 in. This will then leave a small white boarder when you place it on your card if you cut it just a little shy of the measurements. Die cut largest set of dies out of gold / purple Rinea Foil in the upper area of the paper with the Purple side up.

Fold over the the tabs and tuck under the points.

Take the negative left from the die cut and emboss with Flower Vine embossing folder with the gold side up. Adhere to white A2 greeting card with Thermoweb Memory Tape Runner XL.

Adhere Die cut in the center of negative with the Purple side up using Thermoweb Memory Tape Runner XL.

On a scrap of white cardstock stamp Happy Anniversary from Sharon’s Script set in Brutus Monroe Detail ink – Raven. Cut the ends into pennant shape. With an awl or small hole punch make two holes at each end. Place a round min gold brad in each hole. Add White Adhesive Foam Squares to the back and apply to the bottom of the card.

Finally, add a Gold Glitter Round Bling Gemstone Sticker to the center of the die cut shape. Enjoy your beautiful card.

Here is a video for How to Cut, Fold and Tuck with Spellbinders Whirl About die.

Supplies used for How to Cut, Fold and Tuck with Spellbinders Whirl About die:
Glossy Violet and Gold Rinea foil
Spellbinders Shapeabilities Whirl About die set
Brutus Monroe Stamp set Sharon’s Script
Brutus Monroe Detail Ink-Raven
Sizzix Textured Impressions Embossing Folders 2PK – Flower Vine & Twizzle Set by Dena Designs
Gold Glitter Round Bling Gemstone Stickers
Round Mini Gold Brads
Thermoweb Memory Tape Runner XL, 5/16-Inch-by-600-Inch
White Adhesive Foam Squares
Zig Two Way glue Pen
White card A2
Scrap of white cardstock
Vagabond Machine Inspired by Tim Holtz or other like die cutting machine

This card is so pretty that the person who gets it will want to proudly display it in their home or office.

How to Cut, Fold and Tuck with Spellbinders Whirl About die

Interested in purchasing the finished cards I make? I offer many of my cards in my store. The cards a usually blank inside and come with a matching envelope. The cards I make are A2 size or 4.25 in. x 5.5 in. in size. If you are wanting a greeting on the inside feel free to email me to discuss details or to connect with me via my Facebook page.

Thanks for stopping by the blog today.

“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”

How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp

I recently purchased a new Lawn Fawn set. Today I thought I would share How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp and more. Since I joined an altered paper clip swap I knew I wanted to make one with this cute Unicorn Set from Lawn Fawn.

How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp

Supplies used in How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp:
Lawn Fawn Clear Stamp & Die Set – Winter Unicorn It is sold out with Lawn Fawn but I found it on Amazon.
Recollections planner stamps
Recollections Stamps & Dies – Unicorn These are selling out fast.
Brutus Monroe Detail Ink – Raven
Chameleon Pens
Tulip Glitter paint
Acrylic Block
Tim Holtz Shaded Lilac distress ink
Ranger Blending tool
White Card Stock
E6000 Glue
Aleene’s Tacky Glue
Tattered Angles Glimmer Mist Iridescent Gold
Fiskars Micro Tip Scissors
Dimensional or Pop dots
Flat Back Rhinestones or Gemstones from Paper Studios
Rainbow Ribbon
Ranger Craft Mat
Stampin Up scallop circle punch
Protape – Artist Tape
Tim Holtz Vagabond
Cloud Dies set of three on Amazon
Paper Studio Rhinestones
Jumbo Paperclips

Here is a video on How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp:

When I was done I made 5 planner clips. Two went to my swap partner and I’ve not decided if I’ll share the others yet. lol But I will be making more Altered Paper Clips.

How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp

Have you tried your hand at making Altered Paper Clips? These make a great gift to add to a greeting card. Could even be the focal point on a greeting card. When they get the card they can remove the clip and use where ever they like.

For now, I think I’ll keep one in my Happy Planner to help mark my place and I might be persuaded to give the others a new home. 😉

How to make an Altered Paper clip with Lawn Fawn Unicorn Stamp

Thank you for stopping by my blog today. Make today magical.

My JIC Store

How to use flowers and bling on a greeting card

Sharing How to use flowers and bling on a greeting card. This card is featured over on the Brutus Monroe Blog. This Bunny Family is super cute. It is from the set called Bunny Kisses.

How to use flowers and bling on a greeting card

I really enjoyed making this little card. It gave me an opportunity to use up some items in my stash. like the paper flowers and the doily.

Here is a list of all the supplies used in case you don’t make it over to the Brutus Monroe Blog.

Brutus Monroe – Bunny Kisses
Brutus Monroe Detail Ink – Raven
MISTI
Chameleon Pens
Fiskars Easy Touch Scissors
White, Purple and pink Card Stock
Paper Cutter
Lacy edge Die
Leaf die
Paper Doily
Pink Prima Flowers
Pink Ribbon
Tim Holtz Distressed ink – Spun Sugar
Ranger Craft Mat
Ranger Blending tool
Brutus Monroe Rouge surface ink
Scotch tape
Pink Hemp Twine
Aleene’s Tacky Glue
Bone Folder
Zig Two Way Glue pen
Small Jute or twine
Tulip Glitter Glue
Pop Dots or dimensional squares
Pearl Gemstones from Paper Studios
Tweezers
Tattered Angels Glimmer Mists, Iridescent Gold and Vintage Pink

Interested in purchasing the finished cards I make? I offer many of my cards in my store. The cards a usually blank inside and come with a matching envelope. The cards I make are A2 size or 4.25 in. x 5.5 in. in size. If you are wanting a greeting on the inside feel free to email me to discuss details or to connect with me via my Facebook page.

Hope you enjoy seeing How to use flowers and bling on a greeting card. Head over to the Brutus Monroe store to pick up Bunny Kisses today. Here is a video of the process as well.

Thanks so much for stopping by my blog today.

This project has been entered in the following Challenges:
CARDZ TV ANYTHING GOES DESIGNERS CHALLENGE #5
FFC #180 Always anything Goes with Digital Delights by Louby Lou
Week 11- Colour Crazy Challenge – My Mum’s Craft Shop

“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”

How to Make a St Patrick’s Day Altered Paperclip

It is so much fun to alter paperclips. Here is another tutorial: How to Make a St Patrick’s Day Altered Paperclip. Using Rinea Foil and a Shamrock cut on my Cricut.

How to make a St Patrick's Day Altered Paperclip

Wanting to make some fun St Patrick’s altered paper clips I turned to my Cricut first. There wasn’t a Shamrock in my Cricut files so I decided to draw the image and then scanned it into my computer.

Using the Cricut Software I then turned the image into a cut file and cut the Shamrock out of green card stock. Of course, I had to cut at least 20 because these turned out so cute!

Rinea Foil – Gold
Brutus Monroe Jurassic Ink
Ribbon
Jumbo Paperclip
Green card Stock
Cricut
Paper Studios Star Embossing Folder
Tim Holtz Vagabond
Xyron Sticker Maker
Blending Tool
Punch Bunch Flower Punch
McGill Stylis
Fun Foam
Aleene’s Tacky White Glue

Cut a strip of Rinea Foil – Gold at 1.5 in. x 3 in. Emboss in Paper Studios Star Embossing folder with Tim Hotz Vagabond or other like machine. Fold in half and slide through the closed side of the paper clip. Glue with Aleene’s Tacky White Glue.

Place the shamrock in the Xyron Sticker maker then place on both sides of Rinea Foil.

Tie a bow with the Green ribbon and place on the corner of Shamrock.

Use the Punch Bunch flower punch on the Rinea Foil – Gold and punch two flowers. Place on fun foam and press with McGill Stylis to form into a flower. Adhere flower in the center of the shamrock. Repeat on the other side.

How to make a St Patrick's Day Altered Paperclip

Simple as that you have made a St Patrick’s Day Altered Paperclip.

Here is a video on How to Make a St Patrick’s Day Altered Paperclip.

 

Now that you know how to make a St Patrick’s Day Altered Paperclip, how many will you make?

How to make a St Patrick's Day Altered Paperclip

Thanks for stopping by the blog today.